Car accelerates only 20–30 mph? Check Adaptive Speed Limiter
Reported PS5 fix: Some GTA VI players who could not accelerate normally report that the setting Adaptive Speed Limiter was enabled. Their vehicles stayed around 20–30 mph despite holding R2. They report that turning off the limiter restored normal acceleration. This is a player-reported, reversible settings check, not a Rockstar-confirmed universal driving bug fix.
Test without deleting progress: (1) Pause and open Settings → Controller. (2) Under DualSense Wireless Controller Features, locate Adaptive Speed Limiter if present. (3) Temporarily toggle it Off. (4) Return to an open, legal driving area and compare speed on the same vehicle. (5) If nothing changes, restore your preferred setting and check R2 input, damage, terrain, assisted-driving modes and other games; do not assume the car is broken.
Why it matters: Some players like using an intentional limiter for calmer traffic driving. Do not describe it as inherently defective. The exact location may differ on Xbox/custom controls. Sources: November 19 user PSA and November 20 symptom report.
Quick answer: If GTA VI feels sluggish when turning, too twitchy while aiming, or moves the camera without input, open Pause Menu → Settings → Controller. The game has separate look and aim sensitivity, an aim response curve, and stick-deadzone controls. Rockstar confirms the Settings route and Controller category; detailed settings names come from published PS5 menu documentation.
Where are the controller options?
- Pause GTA VI on PS5 or Xbox Series X|S.
- Select Settings.
- Switch to Controller. If your button layout is the problem, visit Control Scheme instead.
- Change one setting at a time, then test on foot and in a vehicle before adjusting more.
Aim sensitivity vs look sensitivity
Look sensitivity affects general camera turning, while aim sensitivity affects aiming behavior. If you can turn normally but cannot track targets, raise aim sensitivity slightly instead of changing both. If the camera swings past targets, reduce it. A PS5 walkthrough reports default sensitivity values of 7, but your on-screen values are the authoritative baseline.
Aim response curve: which should you choose?
Published menu references list Standard, Linear, Precision and Aggressive. Standard is the safe starting point because it preserves the game’s intended default. Linear makes input feel more proportional; Precision can make small aiming corrections easier; Aggressive can feel quicker early in a stick movement. These descriptions are practical starting points, not a claim that one curve is mathematically optimal for everyone.
How to fix stick drift
- Test whether the camera or character moves when you are not touching the sticks.
- Find left-stick and right-stick deadzone options under Controller.
- Raise only the affected stick’s deadzone in small steps until unwanted movement stops.
- If aiming feels unresponsive afterward, reduce the deadzone slightly.
- If movement continues outside GTA VI as well, test another game or controller. Software settings cannot repair a physically failing thumbstick.
PS5 adaptive triggers and haptics
DualSense users can adjust adaptive trigger resistance and vibration to make driving or long shooting sessions more comfortable. Rockstar also lists DualSense features under Controller. Xbox users should not expect PS5-specific DualSense menu rows. See our controller hardware comparison.
Don’t confuse these with visual or aim-assist problems
If motion looks blurry rather than physically slow, check Display and Camera options. If shots are difficult to land despite appropriate sensitivity, look at the Gameplay tab’s targeting and aim-assist controls. For screen color issues see our HDR calibration guide.
FAQ: can I reset the settings?
Yes. Rockstar’s official November 18 support article describes Restore All and Restore Default options at the bottom of Settings. Make a note of your preferred values before resetting.
Sources: Rockstar Support; documented PS5 Controller menu; PS5 settings guide.

